Virtual exhibition BUSINESS-INFORM 2020-2022

GM Technology

Remanufactured Printing Equipment.

GM Technology receives more than 40.000 printing machines every year out of which we export more than 30.000. We can offer all major brands in large quantities. Our second hand machines can be offered in three different ways:

- The Eco-Select machines are a premium selection of our second hand machines. They have the lowest counters (below 400K (A3) and 200K (A4)) and best physical conditions. They are going thru a pre-selection process, a total quality control cycle and a strict print and functional test protocol completed by a team of expert technicians. No parts are replaced but we can safely say that more than 50% of the lifecycle is still available. Hard disks are formatted, firmware’s are updated and a special internal and external cleaning process is done for the perfect product appearance. The Eco Select machines are the best second hand machines you can find on the market.           

- With the Eco Smart machines we can offer the broadest range and most affordable prices. It is the perfect choice when cost is a principal factor. All machines are still tested and all of them are in a perfect working condition passing the eco smart quality control process. We format all disks but apart of that we do not replace nor manipulate any parts. Counters are variable based on what we currently collect. The machines are being shipped with empty toner cartridges installed. Stocks are changing daily based on supply and demand. The Eco Smart machines are the best low cost solution on the second hand market. 

- With our range of Green Line  Equipment, we can off er our partners the opportunity to promote sustainable printing services (MPS) with higher profits. Green line machines are not only the “true circular economy solution” but they also lower initial hardware investments and print costs while maintaining exceptional quality and full manufacturers guarantee. During our manufacturing process we only use OEM parts to guarantee the highest quality and most eco-friendly remanufacturing process. The most cost efficient and most sustainable printing solution on todays MPS market are Green Line Machines running on R-OEM toners.

Remanufactured Consumables

We are the first and only one on the market who developed an industrial process to manufacture the unique R-OEM Copier Toner range at scale. We now remanufacture more than 50.000 toner cartridges per month. Our R-OEM Remanufactured toner cartridges are the only alternative which reduces printing costs and the need for single use plastics at the same time. It a  win win 2 in1 one solution as with each cartridge we remanufacture there is 1 less to be produced and 1 less to be thrown into landfill.

Remanufactured Components

Apart of our remanufactured toner production we also remanufacture other copier consumables such as Developer Units, Drum Units, Transfer Belts, Fuser Units, OPC drums, Cleaning blades, Fuser Sleeves and more. Our own park of machines and many years of MPS experience showed us that high quality parts are the key to profitable machine maintenance. Unfortunately aftermarket copier consumables with real OEM equivalent performance are impossible to find so we opted for remanufacturing the Original ones. All our re-built modules are original modules rebuild with the highest quality premium aftermarket components.

PRODUCTION: Remanufactured printing equipment, consumables and components

Information from GM Technology

12.05.2021

 

 

     Details:  BUSINESS-INFORM Review (issue #31, 2021)

---

31.03.2021

---

31.03.2021

---

31.03.2021

---

31.03.2021

---

18.03.2021

---

18.03.2021

---

18.03.2021

---

18.03.2021

---

11.03.2021

---

11.03.2021

---

11.03.2021

---

11.03.2021

---

11.03.2021

---

03.03.2021

---

03.03.2021

---

03.03.2021

---

03.03.2021

---

24.02.2021

---

24.02.2021

---

24.02.2021

---

24.02.2021

---

10.02.2021

 

 

Details: BUSINESS-INFORM Review (issue #30, 2021)

---

15.12.2020

  

Details: BUSINESS-INFORM Review (issue #29, 2020)

---

15.12.2020

---

09.12.2020

---

10.11.2020

 GM Technology (Spain) – A New Participant of BUSINESS-INFORM 2020 Virtual Expo

November 09, 2020. Moscow.- GM Technology (Spain) – a new participant of International Printing Equipment, Supplies and Parts Virtual BUSINESS-INFORM 2020 Expo.

GM Technology was founded more than 30 years ago. Recently GM Technologies has become the largest manufacturer and supplier of remanufactured products in Europe. The headquarters of the company’s main logistics center is situated in Seville (Spain). GM Technologies offers the remanufactured equipment in three categories GreenLine, Eco Select and Eco Smart; it ships globally approximately 45,000 units and over 280 containers per year. The company serves clients in all 27 EU member states as well as Africa, Middle East, Asia and Latin America. Highly skilled multilingual team, consisting of 125 professionals, with extensive experience dedicated exclusively to the international market allows us to develop unique and outstanding trade relationships. 

GM Technology is member of ETIRA, European Toner & Inkjet Remanufacturers Association. In order to achieve the total satisfaction of the client, GM Technology Management Department undertakes the incorporation of an Integrated Quality and Environment Management System based on regulations UNE-EN ISO 9001 and UNE-EN ISO 14001 establishing the compliance with marked management objectives which will move the company towards established goals.

GM Technology strives to enlarge the network of its partners in Russia and invites Russian specialists to visit its virtual booth AB2 on International Virtual BUSINESS-INFORM 2020 Expo.

On issues related to organizing meetings and contacts with GM Technology representatives please contact the Information Agency “Business-Inform” (Russia), e-mail: bizinform@list.ru  (subject: “Contact with GM Tech”) or GM Technology directly, e-mail: zoltan@gmtechnology.es (Zoltan Matyas).